(formerly Polybeamer & Unrolling Creel)
Precision Beaming for Tomorrow’s Technical Textiles
This machine with composite creel unwinds carbon, glass, aramid, and basalt under constant, electronically controlled tension with full tow separation, ensuring stable fiber delivery and reproducible mechanical properties in prepreg, weaving, filament winding, and pultrusion.
Polymatic - Unwinding Creel
(formerly Polybeamer & Unrolling Creel)
Polymatic
UNWINDING CREEL
Technical Features
- Working width
- : 1800 mm to 6000 mm
- Barrel length
- : 2100 mm to 6300 mm
- Beam flange dia
- : 800 mm to 1250 mm
- Beaming tension
- : 10 KN to 40 KN
- Beaming speed
- : 100 MPM (Higher on request)
- Creel ends
- : 600 to 4000 ends
Features Highlights
Head Stock
- Rigid structure with side frames supporting beam carriages. Independent motorised beam carriages with heavy duty ball bearing arbors to facilitate accommodation of warp beam having different width by means of spline shaft drive. Carriage movement controlled by hand held controller.
Beam Loading/Unloading
- Safe and quick loading and unloading of beam with retractable spline type beam adaptors by means of hydraulic system.
Motorised Beam Arm
- To adjust the variable distance between flange, the beam mounting are adjustable by AC motor and gear box through torque limiting system for the safety of motor.
Control and Automation
- Large display of 10" HMI touch screen with colour graphics provides user friendly access and operation. Display of process data on line as well as setting parameter control like speed / tension / length etc. In built printer to print process data of Beam produced for department record and information.
Warp Sheet Oscillation Through Comb
- Zig zag comb assembly having traverse for vertical movement as well as for horizontal movement to avoid abrasion of the warp with dent as well as to improve proper warp sheet build up on beam.
Expansion Comb for Width Adjustment
- Zig Zag comb provided which is operated by separate AC motor and gear box for warp width adjustment. Expansion and compression is obtained by cam switch. Complete assembly shifting is also abstained by cam switch either LH or RH side to align warp width with beam.
Features Highlights (Polymatic)
Operator Double Safety
- Operator safety devices are provided in front of the nip roller and the beam operation area. These safety devices are interlocked with the machine operation to ensure safety.
Panel AC for Control Panel
- To ensure normal temperature in control panel air conditioning unit installed.
Drive
- Beam drive through AC inverter offers constant beaming speed through out length. Precise linear acceleration and deceleration to maintain constant line speed control in close loop. Constant beaming tension from beam start to end by adjusting pressure in auto close loop. Slow speed Jog speed option provided.
Warp Sheet Feed
- 3 roller feeding system consists of synthetic rubber coated delivery and chrome plated nip roller.
Expansion Comb for Width Adjustment
- Zig Zag comb provided which is operated by separate AC motor and gear box for warp width adjustment. Expansion and compression is obtained by cam switch. Complete assembly shifting is also abstained by cam switch either LH or RH side to align warp width with beam.
Features Highlights(UNWINDING CREEL)
Parallel Unwinding Creel
- Heavy duty MS pipe fabricated structure.
Bobbin Holder Spindles
- Mounted on precision bearings with suitable locking cups and rubber o-rings and equipped with braking provisions for individual spindles. Warp tension adjustment is achieved through a spring-loaded guide.
Creel Front Eyelet Board
- Ceramic Eyelet board on each individual raw for separation of warp sheet raw wise to ensure alignment of all warp ends.